Journal
Scientific and Technical Journal of Information Technologies, Mechanics and Optics
UDK
Issue:4 (156)
Configurable combustion models of combustion chamber of microturbine engine with possibility of connecting various physico-chemical processes
Annotation
Mathematical and numerical models of the combustion of a fuel mixture in the combustion chamber of a microturbine engine have been developed. Complexity of the models can vary, which gives developers a fairly convenient calculation and design tool. Models allow to take into account the required design tasks by considering and not taking into account various physical processes, and create an optimal complexity model for each specific case. The development of the required configuration begins with the consideration of a simple model of the global kerosene in air combustion reaction without conjugate heat exchange with solids. Step by step, models of extended kinetics, swirling flow, radiation, heat exchange with walls, and the presence of lubricant oil in kerosene are added to the calculation methodology. The results of calculating the wall temperature and combustion completeness were compared with those of JetCat P100-RX and P550-PRO turbojet engines, the integral characteristics of which are well known. In the course of the performed computational and experimental studies, a comparison of the run-off spots on the walls of the combustion chamber with the calculated temperature distributions was performed. A good agreement of the results was obtained for the complete mathematical model. The effect of better cooling of the combustion chamber and increasing the completeness of combustion by twisting the flow behind the compressor is revealed. The effect of the addition of oil to kerosene on an increase in specific fuel consumption by 1–4 % has been determined. The significance of the results obtained lies in the possibility of applying the proposed calculation methodology in engineering practice. The considered modifications of the model represent an important stage in the creation and verification of a mathematical model of in-chamber processes.
Keywords
Постоянный URL
Articles in current issue
- Organic-inorganic light-absorbing composites for near infrared part of spectrum
- Study of pyroelectric effect and creation of modified design of phase modulator based on lithium niobate
- Contrast change of the test object image in single-pixel and focal-plane array imaging through a scattering medium
- Synthesis of adaptive observer for nonlinear nonstationary systems
- Automation of search for optimal values of the ethylene oligomerization process parameters
- Electroluminescence of new coordination compounds of europium ions with β-diketones, acetic and butyric acids
- Method for generating multimedia files for the tasks of facial biometrics and its applications
- Advanced methods for knowledge injection in large language models
- Predicting gene-disease associations using a heterogeneous graph neural network
- Computer simulation of the interaction between a shock wave and a wall shielded by an inhomogeneous gas suspension layer
- Flexible and tractable modeling of multivariate data using composite Bayesian networks
- Method for obtaining two-component composite materials with a given thermal conductivity
- Computer simulation of heat and mass transfer processes during water vapor condensation from natural gas combustion products on smooth cylindrical tubes
- Instability of a rectangular CCCC-nanoplate
- Using genetic algorithms to solve the problem of finding the optimal composition of the reaction mixture
- Configurable combustion models of combustion chamber of microturbine engine with possibility of connecting various physico-chemical processes
- Multilevel splitting for rare events estimation in permutation tests
- Method of muscle tissue segmentation in computed tomography images based on preprocessed three-channel images
- Model of adsorption on epitaxial graphene: analytical results